Introduction
Automatic plastic injection machine is not the traditional type of injection machine, it is coming from plastic sheet. Use chain to driving the sheet, going heating oven, use air blow to forming the sheet, also could punching, cutting and stacking automatically.
Could produce disposal type of plastic , widely used for make PP food box, PET fruit box etc .
Specification:
Model | 550H（Up & down heater） |
Punch Frequency | 10-35punch/min |
Material | PP/PS/PET/PVC/PLA |
Max. Forming Length | 350mm |
Max. Forming Width | 550mm |
Max. Forming depth | 70mm |
Upper and Lower Forming Power | Top heater 43kw, bottom heater 41KW |
Total Power | 380V 50HZ 97KW Three-phase and four-wire |
Water Consumption | 0.3m³/h (Tap water or recycle water) |
Air Pressure | 0.5-0.8(mpa) |
Exhaust Volume | ≥0.6 m³/min |
Pressure of water supply | 0.2MPa |
Machine overall size（L×W×H） | 5000*1675×1900mm |
Area cost | 8700*3600 |
The maximum width of material | 580mm |
Weight | 5500KG |
Competitive:
1.Our company is a profession manufacture for Plastic Thermoforming Machine
2.Change the mold is easy and fast, the forming mold have motor control
3.15 inches Touch screen Control, easy for Operation
4.Stacking use robot, could stack different size, and depth products.
5.Forming, and cutting control by separate servo motor.
6.We supply 24 hours on line after service.
7.Cutting use knife, cut down the mold cost, cutting products without of spot, the final products without of thorn
8.Punching have big waste box, no use to cleaning everyday
9.Top mold height re control by motor, make mokd change and adjust very easy
Products comes out and Products in stacking
Inside layout of ware less
Samples display
Hot Tags: automatic plastic injection machine, China, manufacturers, suppliers, factory, customized, price, Small Capacity PP PS Extruder Machine, Vacuum Forming Machine, thermoformer parts, Blister Packaging Machine, formbox, vacuum forming machine parts
