Single Layer Plastic Sheet Extruder Machine

JH 120-950 Mono- layer sheet extrusion -single layer plastic sheet extruder machine

The machine photo is for your reference
Main motor:

1.Machine frame: Adopts high quality national steel, more stable

2.Barrel & Screw ( Zhoushan)

a.Barrel & Screw material: 38CrMoALA

b.Nitrogen depth of screw：0.4-0.6mm;Nitrogen hardness:740HV

c.Screw dia.:120mm,L/D:33:1,Type: Graded separation

d.The surface roughness of screw: 0.4um,roughness of barrel: 0.8um

3.Main motor driver

Power:p=110 kw-6 WNM motor ,AC380v(380v.50HZ)

4.Gear reduction box:
Adopts high quality GUOMAO reduction box, model:315. Rato: 12.5
Gear reducer driven by helical gear on hard tooth surface. Its gear material is of high quality 20CrMoTi Forging parts, high frequency treatment, hardness hrc54-58 (tooth surface grinding)

5.Oven Heating

a.Adopts 7 rows Stainless steel heating ring

b.Power: AC 220V,5OHZ
6.Cooling Blower device

Each heating area have one cooling blower to control.Seven heating have seven cooling blower and cover

7.Fast hydraulic change net machine without of stop

8.Coat type Die head:
1)Width of T die:1000mm,effective width of die head:950mm
2)Mold material adopts 40 Cr forge
3)Heating area have 5 zones (3KW /zone)

Main technical parameter:

Three roller calendaring
1.Transmission mode:Three-roller independent motor control, each motors control by inverter

2.Roller adjust way: Control by turbine and worm synchronous
3.Three- rollers circulating water cooling
4.Inner screw type roller, ensure cooling effective
5.The roller is processed by medium frequency. The surface hardness of the roller is HRc58 or above, and the quenching depth is 3-5mm
6.The bearing pedestal is made of 45# steel. The structure is divided into sections for easy bearing replacement and maintenance

Main technical parameter

Traction frame

1.The bracket is welded by Q235-A, the national standard steel
2.Edge cutting device: two cutting knives can be used on both sides to effectively remove the edge material and cut the sheet material to reach the required width
3.The transition rollers are all wear-resistant aluminum guide rollers, and the surface is treated with hard oxygen
4.Guide Roller Φ60×900

Traction device

1.The traction device adopts Φ 190 neoprene roller and steel roller, including steel roller to active roller, chain transmission, reducer, transmission power is 2.2 kw
2.Hydraulic oil motor rewinder, the roller width can reach 1.5 m

Main technical parameter

Electrical control box

Hot Tags: single layer plastic sheet extruder machine, China, manufacturers, suppliers, factory, customized, price, plastic forming machine, thermoform plastic sheets for vacuum forming, plastic film extrusion, thermoforming machine for sale, extrusion film, kiefel thermoforming