New Thermoforming Machine arrive to Clients work shop
New Thermoforming Mold design for blood tube trays.
New Extruder and Thermoforming machine delivery to Malysiya
China had been well control the Corona Virus, We already back to work
new mold for PET cake box, triangle shape, machine will delivery to Honduras
New type of side punching type thermoforming, width use for Fruit box and straberry box
The main engine of the plastic extruder is the extruder, which consists of an extrusion system, a transmission system and a heating and cooling system. 1. The extrusion system includes screw, barre...
Extrusion machine, also known as extruder, is a type mainly used in power cords, power cables, coaxial cables, communication cables, transmission cables, BV-type civil lines, electronic lines, comp...
1. The size of the extruded package is not up to the standard, which is manifested as eccentricity; the thickness or outer diameter of the sheath is poor; the main reasons are: the extrusion and tr...
1. The extruder should run forward to prevent reverse rotation. 2. Do not run on an empty stomach, and be sure to run the machine with heating and feeding, so as to prevent sticking (shaft holding)...
When producing products, it has been found that the pressing cylinder must be heated or cooled, because the pressing temperature must be within the corresponding temperature range. Next, I will int...
The abrasion of the barrel of the plastic extruder is specifically manifested in the abrasion of the extruder, which will increase the diameter of the barrel. The inner surface of the barrel is har...
