1. Daily maintenance is a long-term routine work that does not take up equipment operating hours and is usually completed during the start-up. The most important point is to clean the machine, lubr...
Under the action of the screw, the extruder presses the molten plastic against the extruder with a fixed shape, and is cut off by water cooling under the action of the tractor. It is mainly used fo...
The extruder adopts two methods of daily maintenance and on-time maintenance. (1) Daily maintenance is a periodic routine work, which does not account for the running time of the machine and equipm...
(1) The extruder can be started up after the temperature is controlled. Before starting up, the machine head and the flange bolts of the extruder should be tightened again to eliminate the differen...
Extrusion machine, also called extruder, is a kind of power plug, wire and cable, coaxial cable, communication cable, transmission cable, BV type civil wire, electronic wire, computer power cord, e...
The development of new technology is the driving force that can continue to move forward in a field. At this stage, the technology of extruders in our country is continuously upgraded, and the peri...
The extruder plays the role of extrusion in the production of commodities. It can be said that the extruder is very critical in the production of commodities. Extruders are all classified according...
Extruder is also a kind of plastic machinery and equipment. The flame-retardant plastic machine divides the engine into oblique angle engine (intersection angle 120°) and oblique angle engine accor...
According to the raw material fluidity orientation of the barrel and the angle of view in the middle of the extruder screw, the extruder can divide the barrel into an oblique angle barrel and an ob...
Single-screw extruders are generally divided into three sections in terms of reasonable length. According to the extruder screw diameter, pitch, and screw depth, the reasonable length of the three ...
What exactly is the process of the extruder in the production process, now I will bring everyone to introduce the content of this level. Mixing, melting, kneading An extruder is like a meat mixer: ...
(1) Check whether all standard parts have been tightened long ago. (2) Check whether all lubricating points are equipped with sufficient grease or lubricating grease. (3) For the oil sump or reduce...
