Quick troubleshooting method for automatic blister machine failure
Friends who operate automatic blister machines and mechanical production know that no matter how regularly the equipment is maintained, it will inevitably fail. We don't want to encounter equipment failure, because if there is an equipment failure, it will not only require a lot of material, human and financial resources for maintenance, but also affect our production plan. In serious cases, it will directly lead to the inability to complete the production task. What should I do if I encounter equipment failure? Let's analyze how to deal with the failure of the automatic blister machine.
We need to analyze the causes of the failure of the automatic blister machine for maintenance:
1. Human failure. Equipment failure caused by excessive use, improper use or improper operation by the operator.
2. Natural failure, no matter what kind of accessories and equipment, if used for a long time, will wear and age. During operation, the worn and aged equipment and parts cannot be used normally.
3. Mechanical failure The machine has defects in the assembly and design process, so there may be problems with the coordination of various components, resulting in failures.
After analyzing the causes of failure of the fully automatic blister machine, we can perform maintenance on it:
1. Man-made failure After repairing the failure, strengthen the training of operators, learn the correct operation method of the blister machine, and avoid failures in future production.
2. Natural failure Because wear and aging are irreversible normal conditions, natural failures are difficult to avoid. But the equipment can be maintained regularly, such as regular lubrication of the crankshaft, which can extend the service life.
3. Mechanical failure requires equipment manufacturers to improve the equipment structure and design concept.
In the actual production of the fully automatic blister machine, various defects may occur in the finished product, affecting quality and sales. Possible
problems of the fully automatic blister machine:
1. Water ripples: Due to the difference in product materials and processing technology, water ripples will appear on the surface of the finished product, and water ripples will appear on transparent products, affecting the appearance of the product. Generally speaking, the thicker the product, the more obvious the water ripples. Among various materials, PVC materials are more likely to produce water ripples.
2. Crystallization point: The crystallization point is caused by tiny impurities in the air falling on the heating plate during the production of the blister machine.
3. Scratches: During the production process, the friction between the outer wall of the product and the machine will form scratches on the surface of the product. It is very important to reduce mechanical friction and maintain the smoothness of the parts.
4. Wiredrawing: If there is no protrusion on the mold, the product produced will have linear protrusions. In order to solve this situation, we need to modify the mold, because the product with wiredrawing cannot be used as packaging. 5. Bubbles: Plastic materials contain air, and the products produced after heating will have bubbles.
The development trend of the fully automatic positive and negative pressure blister packaging industry
The automotive accessories industry should be considered a relatively large industry. The market demand for automobiles is also increasing. There are many companies engaged in plastic manufacturing. Fully automatic positive and negative pressure blister parts are used in our daily lives, and its packaging development has also attracted the attention of many people. With the development of science and technology and the improvement of society, its industry development trend is also changing. For many people engaged in this industry, they are very interested in this knowledge? Today we mainly want to introduce to you the development trend of the fully automatic positive and negative pressure blister packaging industry.
Today's plastic fully automatic positive and negative pressure blister packaging method is fully automatic positive and negative pressure blister vacuum forming, and plastic packaging fusion production is one of the most commonly used molding methods. The production method is to transform a thermoplastic sheet molding into a secondary molding technology. Due to continuous development and transformation, it has been highly automated and mechanized, and no waste edge materials have been generated, from the previous hand-joined production line to the current full-process assembly line production. The development trend of plastic full-automatic positive and negative pressure blister packaging is also very high. Even so, there are also industry insiders who often develop at home and abroad who say that my country's full-automatic positive and negative pressure blister packaging molding method is far behind that of some developed countries. The main reason why my country's plastic packaging production cannot rise is the lack of talent, backward technology and backward equipment. In addition, the fierce competition in the industry has finally caused the stagnation of the industry. If you want to truly develop my country's full-automatic positive and negative pressure blister packaging industry, you need to develop in a reformed way.
