Blister packaging machine: five rules for attention and maintenance
Precautions for starting the blister packaging machine:
1. According to the principle diagram of the blister packaging machine, turn on the power supply in accordance with the regulations for safe use of electricity, and then follow the operation panel to proceed to the next step. When using the operation panel, you need to pay attention to keeping it when starting the machine. The state of grounding.
2. After the blister packaging machine starts to run, connect the water inlet, outlet, air inlet and exhaust valves according to the identification on the nameplate.
3. After opening the blister packaging machine, turn on its various heating parts and set the corresponding temperature to ensure that the heat sealing temperature is around 160, and the upper and lower heating temperature is around 100.
Ensure that the temperature is related to the working speed, the quality of the plastic sheet, the temperature and many other factors. When producing, it is necessary to operate the machine according to the actual relevant requirements.
We need to observe the forming, heat-sealing, blanking and operating conditions become normal, open the gate of its feeding to release the medicine production.
Five specifications for maintenance of blister packaging machine:
1. The aluminum-plastic packaging machine should be wiped and cleaned frequently to keep it clean.
2. Frequently check the operation of the aluminum-plastic packaging machine and deal with any problems in time.
3. Lubricate the equipment on time in accordance with the lubrication requirements.
4. Do not cut off water at each cooling part during work. Supply water before starting the machine, and then heat the heating components; when the production is terminated, stop the water supply after the heating components reach normal temperature.
5. The surface of the heat-sealing roller should be kept clean. Use a fine copper wire brush to remove the attachments under heating. At the same time, the operator should pay attention to the operating range and the distance between the hands, arms and body and the heating roller to avoid burns.
